Friday, May 27, 2011

Elementary analysis for width/height ratio of retaining masonary structure

As we know that masonry structure cannot resist tension, hence all the lateral force should be resisted by its weight component only. In this article we will derive expression for width/height ratio for a simple rectangular masonry structure.


force.jpg


Let,


γ=density of water


Sm=specific gravity of masonry material


SL=specific gravity of material giving lateral force (e.g. water, soil etc)


h=height of the structure


x=width of the structure


W=weight of structure=h*x*s* γ


μ= coefficient of friction


Case1: For overturning


Moment dut to lateral force=moment due to weight of the material


½* γ*sL*h2*h/3 =W*x/2


Or, ½* γ*h2*h/3*sL = γ *sm*h*x*x/2


Or, (x/h)2=(sL/(3*sm))


Or, x/h=sqrt(sL/sm/3)


For water sL=1;for stone masonry sm=22/9.81=2.14


Therefore, x/h=0.394≈0.4


Case2: For Sliding


Horizontal force=friction factor*weight of the structure


½* γ*sL*h2= μ (γ*sm*h*x)


Or, x/h=sL/(2*sm* μ)


For water and stone masonry and using μ=0.65


x/h=0.359≈0.4



Thus from above derivation we see that the minimum base width/height ratio of the rectangular block to resist the lateral (triangular here) force with safety factor 1 is 0.4.


With safety factor of 1.5 the minimum width/height ratio becomes 1.5*0.4=0.6.





Derivation of Combined Angle


Abstract: Derivation of combined angle may become useful when you want to know the magnitude and direction of force due to bend in both XY and XZ plane. For eg in design of bend in pipeline.


Let us consider a straight line which deflects at O along OA as shown in the figure. The deflection angles are also shown in the figure.


Let R be the position vector of A. OB is projection of OA on XY plane and AB is projection of OA on a plane parallel to YZ plane. Similarly, OC is projection of line OB in X axis and BC is projection of OB on axis parallel to Y axis.


From figure it can inferred that


OB=R cosα


AB=R sinα


OC=OB cosβ = R cosα cosβ


BC= OB sinβ =R cosα sinβ


Therefore, the position vector of A is OA which is given by


R=|R| (cosα cosβ i + cosα sinβ j + sinα k )


And the unit vector along R is given by


r= (cosα cosβ i + cosα sinβ j + sinα k )


Now the combined deflection angle is given by


r . i =|r| |i| cosδ


Or, r . i =1*1 cosδ


Or, cosδ = cosα cosβ+0+0


Or, δ =cos-1(cosα cosβ)


The angle δ lies in the plane OAC. This plane is shown in the figure in hatch line.


Forces


If F be the magnitude of force due to the deflection δ (e.g. deflection in pipeline) then the vertical and horizontal component of this force is given by,


Fx1 =F r . i =F cosα cosβ


Fx2 =F r . j =F cosα sinβ


Fx =F


=F cosα


Fy =F r . j


=F sinα

Wednesday, December 1, 2010

Hide your text

Thinking of giving your letter which nobody can see (yeh yeh except you!!) or saving your password list so that no one can see. I was amazed to see this trick hope you will also..Just do the following procedure...



  • Open your command prompt Start->Run type cmd

  • Move to any destination for example let us assume C:\> drive

  • Type the below code in your command prompt


  • C:\>notepad mytest.txt:hidden

  • Write some data and save the file.

  • Move to C:\> and open mytest.txt you cannot see no data in the file.

  • To retrieve the hidden data open command prompt and type the same command.


  • C:\>notepad mytest.txt:hidden

  • Notepad will open mytest.txt file with hidden data


You can edit the file normally to put visible data as well..


Amazing isn't it!!